Adsorption and Diffusion of Sodium on Graphene with Grain Boundaries

Effects of grain boundaries (GBs) in graphene on adsorption and diffusion of sodium were investigated using first principle calculations. Results showed that the presence of GBs in graphene enhanced the adsorption of sodium, with their adsorption energies in the range of -1.32~-0.79 eV, which were lower than the value of -0.67 eV for sodium adsorbed on pristine graphene. The diffusion energy barriers were in the range of 0.09 to 0.35 eV when sodium was diffused along GBs of graphene, whereas they were decreased when sodium was gradually diffused into the GBs. Results showed that graphene with GBs had a larger energy storage capacity for sodium than the pristine one, indicating that it can be used as a good anode material for sodium ion batteries

Composites of Piezoelectric Materials and Silicon as Anode for Lithium Ion Batteries

Group IVA elements (Si, Ge and Sn) are promising candidates for the anode materials of lithium ion batteries (LIBs) due to their large theoretical specific capacities. However, serious problems of pulverization and capacity degradation resulted from the huge volume changes during charge/discharge operations hindered their successful applications as the anode materials in the LIBs. In this work, diffusion behaviors of Li ions in Si(100) and Si(111) slabs with a piezoelectric field applied perpendicularly to the surfaces were investigated using density functional theory. Results showed that the diffusivity of the Li in Si can be significantly enhanced by applying the electric field generated from the piezoelectric material. This finding can explain well the recent experimental observations in which improved electrochemical performance was obtained using Si/carbon nanotube/BaTiO3 as the anode for the LIBs. New generation of anode composite materials can be designed based on this idea and the piezoelectric material is used not only to accommodate the volume variation of active materials of Si, but also to enhance the charging rate of the LIBs

Cross- and in-plane thermal conductivity of AlN thin films measured using differential 3-omega method

Thickness dependency and interfacial structure effects on thermal properties of AlN thin films were systematically investigated by characterizing cross-plane and in-plane thermal conductivities, crystal structures, chemical compositions, surface morphologies and interfacial structures using an extended differential 3ω method, X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy, atomic force microscopy (AFM) and transmission electron microscopy. AlN thin films with various thicknesses from 100 to 1000 nm were deposited on p-type doped silicon substrates using a radio frequency reactive magnetron sputtering process. Results revealed that both the cross- and in-plane thermal conductivities of the AlN thin films were significantly smaller than those of the AlN in a bulk form. The thermal conductivities of the AlN thin films were strongly dependent on the film thickness, in both the cross- and in-plane directions. Both the XRD and AFM results indicated that the grain size significantly affected the thermal conductivity of the films due to the scattering effects from the grain boundary

Density Functional Theory Analysis of Surface Structures of Spinel LiNi0.5Mn1.5O4 Cathode Materials

First-principle calculation was employed to investigate the surface stability for (100), (110) and (111) low index facets of LiNi0.5Mn1.5O4 (LNMO) crystallographic structures with a P4332 space group and phase transitions at the surface regions of Ni0.5Mn1.5O4. The calculated surface energies of (100) and (111) facets with Li-terminations are 1.39 and 1.40 eV, respectively, indicating that both these facets of the LNMO are stable according to the calculation results. Defect formation energies and diffusion barriers of Ni and Mn in surface facets of the Ni0.5Mn1.5O4 are much lower than those in the bulk. This suggests that the Ni and Mn ions in the surface regions of the LNMO easily occupy the tetrahedral Li-positions during delithiation process, which supports the experimental results and explains the surface structure changes of the LNMO upon delithiation

Rhenium Doping Induced Structural Transformation in Mono-layered MoS2 with Improved Catalytic Activity for Hydrogen Evolution Reaction

This paper reports a new design methodology to improve catalytic activities of catalysts based on two-dimensional transition metal dichalcogenides through elemental doping which induces structural transformations. Effects of rhenium (Re) doping on structural stability/phase transformation and catalytic activity of mono-layered trigonal prismatic (2H) MoS2 were investigated using density functional theory as one example. Results show that 2H-Mo1-xRexS2 transforms into 1T'-Mo1-xRexS2MoS2 as the value of x is larger than 0.4, and the transfer of the electron from Re to Mo is identified as the main reason for this structural transformation. The 1T'-Mo1-xRexS2 shows a good catalytic activity for the hydrogen evolution reaction when 0.75≤x≤0.94

Frequency effect on streaming phenomenon induced by Rayleigh surface acoustic wave in microdroplets

Acoustic streaming of ink particles inside a water microdroplet generated by a surface acoustic wave(SAW) has been studied numerically using a finite volume numerical method and these results have been verified using experimental measurements. Effects of SAW excitation frequency, droplet volume, and radio-frequency (RF) power are investigated, and it has been shown that SAW excitation frequency influences the SAWattenuation length, lSAW , and hence the acoustic energy absorbed by liquid. It has also been observed that an increase of excitation frequency generally enhances the SAW streaming behavior. However, when the frequency exceeds a critical value that depends on the RF power applied to the SAW device, weaker acoustic streaming is observed resulting in less effective acoustic mixing inside the droplet. This critical value is characterised by a dimensionless ratio of droplet radius to SAWattenuation length, i.e., Rd/lSAW . With a mean value of Rd/lSAW  ≈ 1, a fast and efficient mixing can be induced, even at the lowest RF power of 0.05 mW studied in this paper. On the other hand, for the Rd/lSAW ratios much larger than ∼1, significant decreases in streaming velocities were observed, resulting in a transition from regular (strong) to irregular (weak) mixing/flow. This is attributed to an increased absorption rate of acoustic wave energy that leaks into the liquid, resulting in a reduction of the acoustic energy radiated away from the SAW interaction region towards the droplet free surface. It has been demonstrated in this study that a fast and efficient mixing process with a smaller RF power could be achieved if the ratio of Rd/lSAW  ≤ 1 in the SAW-droplet based microfluidics

Electric field enhanced adsorption and diffusion of adatoms in MoS2 monolayer

A new phenomenon, electric field enhanced adsorption and diffusion of lithium, magnesium and aluminum ions in a MoS2 monolayer, was investigated using density functional theory in this study. With the electric field increased from 0 to 0.8 V/Å, the adsorption energies of the Li, Mg and Al atoms in the MoS2 monolayer were decreased from −2.01 to −2.49 eV, from −0.80 to −1.28 eV, and −2.71 to −3.01 eV, respectively. The corresponding diffusion barriers were simultaneously decreased from 0.23 to 0.08 eV, from 0.15 to 0.10 eV, and 0.24 to 0.21 eV for the Li, Mg and Al ions, respectively. We concluded that the external electric field can increase the charging speed of rechargeable ion batteries based on the MoS2 anode materials

Modeling strategy for dynamic-modal mechanophore in double-network hydrogel composites with self-growing and tailorable mechanical strength

Smart materials with self-growing and tailorable mechanical strength have wide-range potential applications in self-healing, self-repairing, self-assembly, artificial muscle, soft robots and intelligent devices. However, their working mechanisms and principles are not fully understood yet and mathematically and physical modeling is a huge challenge, as traditionally synthesized materials cannot self-grow and reconstruct themselves once formed or deformed. In this study, a phenomenological constitutive model was developed to investigate the working mechanisms of self-growing and tailorable mechanical strength in double-network (DN) hydrogel composites, induced by mechanochemical transduction of dynamic-modal mechanophore. An extended Maxwell model was firstly employed to characterize the mechanical unzipping of hydrogel composites, and then mechanochemically induced destruction and reconstruction processes of brittle network in the hydrogel composite were formulated. The enhanced mechanical strength of brittle network has been identified as the key driving force to generate self-growing and tailorable mechanical strength in the hydrogel composite. Finally, a stress-strain constitutive relationship was developed for the dynamic-modal mechanophorein the hydrogel composite. Simulation results obtained from the proposed model were compared with the experimental data, and a good agreement has been achieved. This study provides an effective strategy for modelling and exploring the working mechanism in the mechanoresponsive DN hydrogel composites with self-growing and tailorable mechanical strength